For outdoor projects without a standard generator room
Suitable for factories, commercial campuses, hospital support and standalone equipment zones where the generator, airflow, exhaust, controls and maintenance space should arrive pre-integrated.
Typical Project Configuration · Customizable Range · 500kW
500 kW Yuchai + Faraday Containerized Diesel Generator
For medium-to-large projects requiring fixed outdoor installation, integrated transport and dedicated service space. The container must be coordinated with cooling, airflow, exhaust, fuel and cable exit—not treated as a simple shell.
500 kWYuchai engineFaraday alternatorContainer integration
Product photos · Typical configuration
Configuration overview
Reference 500 kW containerized generator with Yuchai engine and Faraday alternator, covering outdoor fit, thermal management, key parameters, quality and logistics.
- Reference output
- 500 kW / 625 kVA @ PF 0.8
- Package format
- Outdoor pre-integrated container station
- Engine platform
- Yuchai
- Alternator
- Faraday
- Frequency and speed
- 50Hz / 1500rpm · 60Hz / 1800rpm
- Electrical output
- Three-phase, four-wire · Project voltage
This page presents one typical project configuration to explain output, brand combination, package format and system interfaces. The same range covers additional outputs and options; the final engine model, rating, voltage, controller, tank, dimensions and supply scope are defined for the project.
Applications
Recommended applications and package choice
Do not freeze the container before transport, lifting and hot-air discharge are confirmed
Road limits, lifting points, foundation, service-door orientation and hot-air recirculation can change the final layout and placement.
Typical application
Medium factory outdoor backup
Medium factory outdoor backup
Typical application
Commercial campus and hospital support
Commercial campus and hospital support
Typical application
Fixed power station without a standard room
Fixed power station without a standard room
Core configuration
Four core configurations behind reliable operation
Engine and cooling
The engine and radiator are matched to output, duty and ambient temperature, with attention to load response, service access and local support.
Alternator
The alternator is selected for load characteristics, excitation, insulation and temperature rise; PMG can be specified for demanding motors or UPS loads.
Controls and protection
The controller can integrate ATS, paralleling and remote communications together with breaker, emergency stop, charging and protection functions.
Structure and interfaces
The base, mounts, grounding, cable exit and lifting interfaces form the package structure; container versions also integrate airflow, exhaust, weatherproof doors and service space.
Key parameters
Parameters used for project selection
These are the parameters that shape selection and interfaces. Fuel consumption, noise and dimensions are supplied after the engine model, load factor and site environment are defined.
| Reference output | 500 kW / 625 kVA @ PF 0.8 |
|---|---|
| Rating basis | Prime/standby rating confirmed against the final engine model, ISO 8528 conditions and project duty |
| Frequency / speed | 50 Hz / 1500 rpm or 60 Hz / 1800 rpm |
| Rated voltage | 380 / 400 / 415 / 440 / 480 V; other voltages by project |
| Phase / power factor | Three-phase, four-wire; reference PF 0.8 |
| Control system | DSE / ComAp / SmartGen selected for ATS, paralleling and communications |
| Cooling and environment | Container airflow, resistance and 40°C/50°C ambient capability verified by heat balance |
| Fuel autonomy | Base tank, day tank or bulk storage sized from target runtime and usable fuel volume |
Quality and delivery
Delivery evidence from components and structure to testing
Nameplates and BOM
Engine, alternator, controller and breaker brands, models and serial information are listed in the technical and delivery documents.
Structure and workmanship
Base steel, welds, fasteners, mounts and coating are included in manufacturing inspection; container packages also cover doors, hinges, locks, seals and lifting points.
Cooling and electrical
Radiator, airflow, wiring terminations, grounding, protection and safety separation support loaded stability and long-term serviceability.
Factory-test records
Factory records can cover starting, no-load and staged-load operation, voltage, frequency, alarms and protection, with witnessed FAT available by project.
Project configuration
Optional systems and project inputs
Optional systems
- ATS transfer and low-voltage distribution
- Paralleling, N+1 and future expansion
- Base tank, day tank and automatic transfer
- Remote monitoring, communications and records
- Breaker, charger, heaters and spares package
- Special voltage, hot/high-altitude and corrosion protection
Information needed for an accurate proposal
- Critical-load list, maximum simultaneous load and starting sequence
- Prime/standby duty and expected annual operating hours
- Country, frequency, voltage, grounding and grid boundary
- Temperature, altitude, dust, salt exposure and noise target
- Fuel runtime, refueling route and fire requirements
- Transport, lifting, foundation, installation and FAT/SAT responsibility
Ask an engineer to verify this package against the real loads
Provide the country and city, load list, frequency, voltage, duty, installation environment and required delivery. A HOHANK engineer will verify output, component selection, interfaces and the supply boundary.